Peanut Butter Fudge ~ Old Fashioned Recipe - I Cook And Paint (2024)

April 1, 2022

Peanut Butter Fudge ~ Old Fashioned Recipe - I Cook And Paint (1)

If you’ve ever made peanut butter fudge that was overly sweet, too soft or too dry, then you’ve just found the right recipe. This peanut butter fudge is an old fashioned recipe that I’ve been making for years, and I’ve never wanted to make any other one. Though I have bounced from different recipes for chocolate fudge and other flavours, this one for peanut butter can’t be beat.

What Makes This Fudge Old Fashioned?

The ingredients used in this recipe are what make this truly old fashioned. Besides brown and white sugars, evaporated milk is used–an ingredient that was a staple through some of the toughest times in history. In addition comes butter, cream of tartar and salt. That’s it. No sweetened condensed milk, no powdered sugar, no marshmallows and no peanut butter chips. Just technique and simple ingredients.

Peanut Butter Fudge ~ Old Fashioned Recipe - I Cook And Paint (2)

Can I Use Regular Milk?

Yes you can, though I would recommend using whole milk. The butterfat content makes a difference in most baked goods and this fudge is no exception. Evaporated milk has had 60% of the water cooked out of it, making it even higher in fat and therefore perfect for confections like fudge. That is not to say it will turn out poorly if you use regular milk but for the fullest flavour and texture always go full fat.

How Long Will This Fudge Keep?

This peanut butter fudge will keep sealed in an airtight container for 1-2 weeks at room temperature. If you refrigerate it, your fudge will last about 1 week longer. It will last in the freezer for 3-4 months.

Peanut Butter Fudge ~ Old Fashioned Recipe - I Cook And Paint (3)

Tips For Making The Best Peanut Butter Fudge

  • Stir constantly while the fudge mixture comes to a boil. This will help dissolve the sugar crystals and yield a very smooth fudge. If you neglect to stir, the mixture can stay grainy and your fudge will seem crunchy.
  • Don’t stir the mixture while it’s cooking. Once it’s come to a boil, reduce the heat and leave it alone. Stirring it at this point can create sugar crystals that might make the fudge seize. With the exception of occasional checking the bottom with a wooden spoon for scorching, let it cook undisturbed.
  • Cook the mixture to the proper temperature. This should be 237F-239F. If you don’t cook it long enough, the fudge will not set. If you cook it too long it will be hard and crumbly. It’s almost best to take it off the heat when it reaches 235F because it continues to cook.
  • Don’t over beat it. When you add the peanut butter to the hot mixture, allow it to become slightly fluid before beating it in. This helps prevent over beating which will cause it to become too stiff. Once the peanut butter is fully melted in, quickly pour it into the prepared pan and don’t smooth the top too much.
  • Allow the fudge to set completely before cutting. It will cut much easier and cleaner if it is entirely solid and cooled.

I hope I’ve helped you find the peanut butter fudge recipe of your dreams. If you try it, let me know how it turned out for you!

Peanut Butter Fudge ~ Old Fashioned Recipe - I Cook And Paint (5)

Peanut Butter Fudge ~ Old Fashioned Recipe

An old fashioned fudge recipe that does not use sweetened condensed milk or icing sugar.

Print Recipe Pin Recipe

Prep Time 10 minutes mins

Cook Time 20 minutes mins

Course Dessert

Cuisine American

Servings 24 pieces

Ingredients

  • 200 grams brown sugar
  • 250 grams white sugar
  • 160 grams evaporated milk
  • 20 grams unsalted butter
  • ½ teaspoon cream of tartar
  • ½ teaspoon salt
  • 9 ounces peanut butter
  • 1 teaspoon vanilla

Instructions

  • Line a 9 x 5 inch loaf pan with parchment paper. In a medium saucepan combine brown sugar, white sugar, evaporated milk, butter, cream of tartar and salt. Cook over medium heat, stirring constantly until the sugars are dissolved and the mixture looks smooth.

  • Once the mixture comes to a bowl, stop stirring and reduce the heat to medium low. Allow the the mixture to cook until it reaches 240F/115C or soft ball stage. This will take approximately 15-20 minutes. If you do not have a candy thermometer. check by dropping a small amount of the mixture into a cup of cold water. If it forms a soft ball, it is ready.

  • Remove from heat and add peanut butter and vanilla. Begin beating the mixture by hand with a wooden spoon until the peanut butter has melted and the fudge looks smooth. As soon as it begins to lose its gloss, spread into the prepared loaf pan. Work quickly without smoothing it too much. Allow the fudge to cool for 2 hours before cutting into squares.

Keyword fudge, peanut butter

Author: Paul

Filed Under: Candy, Desserts

Tags: Fudge, how to make fudge, Peanut butter, peanut butter fudge recipe

Peanut Butter Fudge ~ Old Fashioned Recipe - I Cook And Paint (2024)

FAQs

Why is my old fashioned fudge not hardening? ›

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

Why did my peanut butter fudge not get hard? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

What should you not do when making fudge? ›

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

Why is my peanut butter fudge dry and crumbly? ›

There are 2 reasons that fudge will crumble: overcooking & having an undissolved sugar crystal in the mixture. That undissolved crystal will cause the dissolved sugar to recrystalize (think rock candy).

Should you stir fudge while it's boiling? ›

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

Can you fix fudge that didn't set? ›

To fix it, you can reheat the fudge mixture over low heat and continue cooking until it reaches the proper temperature. Be sure to use a candy thermometer to monitor the temperature accurately. Alternatively, you can try to salvage chewy fudge by mixing it into ice cream or using it as a topping for desserts.

How do you fix peanut butter fudge that is too soft? ›

To fix soft fudge or hard fudge, simply follow these easy steps: Scrape the fudge back into a large saucepan and add 1 1/2 cups of water. Stir the fudge over low heat until it dissolves. Carefully taste the mixture, as the water probably diluted the flavor.

How do you fix runny peanut butter fudge? ›

Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

Why is my peanut butter fudge chewy? ›

If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).

What is the key to good fudge? ›

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

What is the secret to smooth fudge that is not gritty? ›

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

Why can't you make fudge when it's raining? ›

Cooking in High Humidity Can Cause Problems

Humidity can cause fudge to boil over in the pan or stay soft when set, so try to avoid working on humid days if at all possible.

Why does my peanut butter fudge taste grainy? ›

– There are a number of reasons why the fudge was grainy. It might be that you haven't dissolved all the sugar before boiling the fudge mixture. It could be that there just wasn't enough fluid or fat to enable the sugar to dissolve or it might even be that the fudge wasn't beaten long enough or hard enough.

How long do you boil fudge to get to soft ball stage? ›

How long does it take to make fudge:
  1. about 18 min to reach boiling.
  2. about 40 minutes to reach soft ball stage.
  3. 60 minutes to cool.
  4. 28 minutes to beat in a KitchenAid (your time for this may vary)
  5. 4 hours to set.

How do you fix fudge that is too soft? ›

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

Why is my fudge mixture not thickening? ›

If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).

How long does it take for fudge to fully harden? ›

Proper fudge will set after sitting at room temperature for about 4 hours.

How long should it take fudge to harden? ›

After your fudge has completely set (this usually takes about four hours on the counter top), remove it from the foil and cut it into squares. If you use a rounded baking pan, cut off just enough of the edge so that the fudge no longer has a rounded edge. Doing this will give every piece of fudge a nice flat bottom.

References

Top Articles
Latest Posts
Article information

Author: Merrill Bechtelar CPA

Last Updated:

Views: 6735

Rating: 5 / 5 (50 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Merrill Bechtelar CPA

Birthday: 1996-05-19

Address: Apt. 114 873 White Lodge, Libbyfurt, CA 93006

Phone: +5983010455207

Job: Legacy Representative

Hobby: Blacksmithing, Urban exploration, Sudoku, Slacklining, Creative writing, Community, Letterboxing

Introduction: My name is Merrill Bechtelar CPA, I am a clean, agreeable, glorious, magnificent, witty, enchanting, comfortable person who loves writing and wants to share my knowledge and understanding with you.